컨텐츠 바로가기


검색 검색

현재 위치

  1. 헬리콥터(Kit)

이전 제품 보기

다음 제품 보기

크게보기

[P0000DTT] [Align] T-Rex600E PRO V2 Super Combo 적립금

() 해외배송 가능

[Align] T-Rex600E PRO V2 Super Combo 기본 정보
판매가
소비자가 0원
적립금
  • 0 (1.00%)
  • 무통장 결제시 적립금 ( %) 무
  • 카드 결제시 적립금 ( %) 카
  • 실시간 계좌 이체시 적립금 ( %) 실
  • 적립금 결제시 적립금 ( %) 적
  • 휴대폰 결제시 적립금 ( %) 휴
무이자할부
제조사 ALIGN
원산지
상품코드 P0000DTT
수량

updown

국내/해외배송

장바구니 담기 관심상품 등록 추천 메일 보내기

쇼핑 계속하기 바로 구매하기

event

상품상세정보

AlignRC T-Rex600E PRO Super Combo - V2

- 3rd Generation T-Rex600E(Flybar Type) Pro Super Combo -  

 

<구 성>

1. 필드에서 호평 받은 New MX600 모터의 High Voltage 버젼!

Li-Poly 기준 최대 48V(12 Cell)까지 지원!(510KV)

2. 더 이상 설명이 필요없는 - Brushless ESC의 명가!

   Castle ICE -HV 타입 브러시리스 변속기 기본 사양!

3. 완전히 새롭게 설계된 Full Programmable 방식의 플라이바 헤드.

   벨/힐러 비율을 최대 3단계로 조절이 가능하며 사용자의 취향에 따라 Pattern 또는 극악 3D에 적합하도록 벨/힐러 비율을 변경 할 수 있습니다.

4. 역시 T-Rex700과 동일한 슬라이딩 배터리 트레이 마운팅 방식을 채용, 필드에서 보다 간편하게 배터리 교체 가능.

5. T-Rex500E/700E에서 호평 받은 헬리컬 방식 메인기어 시스템.

6. T-Rex700E에서 별매 옵션이 었던 Metal Elevator Servo Mount가 기본 사양.

7. 보다 간편한 테일 메인터넌스를 위한 테일서보 후방 마운팅 방식(카본 엠베디드)을 채택.

8. 전자 장비(ESC 및 Regulator등) 수납을 위한 H-Cross 섹션 노즈 마운트.

9. 완전히 새롭게 디자인 된 카본 테일 컨트롤 로드 세트.

10. 550E/600/700 시리즈에서 완전히 검증된 고효율 테일 샤프트 드라이브 방식.

11. 테일 슬라이더 내구성을 위한 컨트롤 암 및 내 마모성 Composite 슬리브 장착!

12. 이제는 대형 전동헬기의 표준! DS610 X 3 Set + DS650 Tail Servo 기본 사양!

    아울러 600급에 걸맞는 Metal Servo Horn은 이제 기본!

13. Gyro의 표준! GP780 Head Lock 자이로가 기본 사양!

14. 600mm 카본 로터 기본 사양.

 

<Demo 동영상>

Special Thanks to Alan Szabo!

 

 

- Specification

●Features
1.Brand new all metal high precision and high rigidity main blade assembly, providing 3 positive/negative deltas and numerous Bell & Hiller mixing ratios. The head can be tuned for superior stability suitable in F3C competition, or lightening fast agility for 3D aerobatic exhibition.
2.The frame utilizes 2mm carbon fiber plates of the highest spec. Patented composite material construction technique cleverly utilize frame space that improved overall rigidity, and also created a minimalistic beauty.
3.Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring loaded latching mechanism, allowing for quick battery access as well as battery protection.
4.Heatsink embedded into motor mount for effective cooling of motor.
5.Top mounted motor base bringing the motor’s center of gravity closer to rotating disc, improving 3D agility.
6.Utilize direct link CCPM swashplate control system to enable direct and fast control response. Specially designed anodized CNC servo horns are not only visually pleasing, but are extremely rigid.
7.Utilizes highest spec CNC modue-1 helical main gear, with highest load tolerance and lowest noise.
8.The most optimal motor pinion ratio and tail gear ratio to achieve the most efficient power output and flight characteristic.
9.High quality 5mm carbon rod and CNC metal tail scissor control arms are used in rudder control system to improve rudder lockingand control effectiveness.
10.Additional radial bearing is added to the one way bearing block to ensure smooth rotation, and eliminate jammed one way bearing.
11.Brand new 600 class 12S high voltage brushless motor providing generous torque and power output, yet consumes lower average current to prolong the life of batteries
12.Motor mount consists of third bearing block to provide motor shaft support, effectively reduce torque induced shifts, and minimize gear striping issue.
13.Ergonomically designed H-shaped electronic mount to provide flexible organization or equipment, and minimize wire clutter.
14.Brand new CNC machined metal tail gear box, with thicker side plates to increase rigidity. The more streamlined design also allows for simpler disassembly.
15.Total pitch range of +15~-15 degrees, for the ultimate 3D explosive power.
16.Tail pitch mechanism equipped with high precision bearing.
17.High speed thrust bearings in tail blade grips.
18.New lightened landing gear assembly with lower center of gravity.
19.High quality painted fiberglass canopy with 4-point quick release mounts.


- Specification(T-REX 600E PRO Super Combo) :

● Length: 1160mm
● Height: 353mm
● Width: 210mm
● Main Blade Length: 600mm
● Main Rotor Diameter: 1347mm
● Tail Rotor Diameter: 260mm
● Motor Drive Gear:13T
● Main Drive Gear:112T
● Autorotation Tail Drive Gear: 131T
● Tail Drive Gear: 34T
● Drive Gear Ratio: 1:8.61:3.85
● Weight(With Motor): 2350g

- Accessories:

●T-REX 600E PRO Kits Set X1
●Aluminum Tail Boom X1
●600D Carbon fiber blades X1
●600MX Brushless Motor(510KV) X1
●DS610 Digital servoX3
●DS650 Digital servo X1
●GP780 Head Lock Gyro X1
●Castle ICE HV 80 Brushless ESC X1
●6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
●105mm 3K Carbon Fiber Tail Blades X1 Set


Radio transmitter and electronic equipment required for assembly:
●Transmitter(7-channel or more, helicopter system)
●Receiver(7-channel or more)
●6S Li-Po 2600 ~ 5200mAh X2 (3300mAh suggestion)
●Dial Pitch Gauge

 

배송 정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 4,000원
  • 배송 기간 : 1일 ~ 2일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

교환 및 반품 정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
  경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
- 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
  다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

교환 및 반품이 불가능한 경우
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
  포장 등을 훼손한 경우는 제외
- 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
  (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
  따른 반품/교환은 제조사 기준에 따릅니다.)
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
  제공한 경우에 한 합니다.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
- 복제가 가능한 상품등의 포장을 훼손한 경우
  (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
  (색상 교환, 사이즈 교환 등 포함)

서비스 문의

구매 혹은 사용상 불편이나 문의 하실 내용이 있으시면 회사(042-826-2660) 혹은 휴대 전화(080-000-2660)로 문의 주시면 최선을 다하여 성실히 답변하며 언제나 고객님의 불편을 덜어드리기 위해 최선을 다하겠습니다.

상품 사용 후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

모두 보기 사용 후기 쓰기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

모두 보기 상품 Q & A 쓰기


이전 제품

다음 제품